Android rugby: Update

Home / Posts filed under Update

Tampilkan postingan dengan label Update. Tampilkan semua postingan

How To Make Gevey on iOS 6.1 iPhone 4 Work Flawlessly

Posted by Unknown Senin, 11 Februari 2013 0 komentar

Updated:

I decided to upgrade an iPhone 4 with baseband 04.10.01 running iOS 5.1.1. The device was hacktivated and unlocked using Gevey.

After 30 minutes I successfully landed on iOS 6.1 baseband 04.10.01 and still unlocked with Gevey sim. Ultrasn0w 1.2.8 couldnt download because it was not compatible with my iOS 6.1 which is strange.

Through out the whole process, both Gevey and SIM remained in the phone.

Here are my steps in a easy fashion and i Hope you find it useful.
This post was published in February before iOS 6.1.3 was launched. If you want to install iOS 6.1 now, you will need SHSH blobs

NEEDED ITEMS

1. Sn0wbreeze 2.9.9

2. iOS 6.1 - 6.1.2 IPSW

3. Internet connection

4. Redsn0w 0.9.15b3

5. Ultrasn0w 1.2.7 and Mobile Substrate

6. iTools or iFunbox or iExplorer

NOTE 1: This post does not apply to those that want to upgrade to iOS 6.1.3

NOTE 2: If you want to update to the IPSW in this post as of now (1/March /2013), you will need SHSH blobs

NOTE 3: To learn more about SHSH blobs, click here

Step 1

Back-up your device with iTunes. Also, make sure all your apps are transferred into your iTunes

Step 2

Download iOS 6.1 for your device here. Please make sure you select the right one as there are 3 kinds of IPSW for iPhone 4 iOS 6.1 with regards to the model (written at the lower back of the phone)

If your model is A1332 then you will download iPhone 4 (GSM iPhone3,1)

if your model is NOT A1332 and NOT A1349 (CDMA) then you will download iPhone 4 (GSM iPhone3,2) iOS 6.1 version.

Step 3

Download Sn0wbreeze 2.9.9 here.

Step 4

Create a custom firmware with Sn0wbreeze to avoid your baseband upgrade. To achieve this:

launch and extract the previously downloaded Sn0wbreeze on your desktop.
Click OK when it opens, click on the blue arrow and then select your newly downloaded iOS IPSW
Sn0wbreeze will identify this and then you click on the blue arrow again.
Select 'Simple mode'. You will be asked if you want to activate. Click yes.
Sn0wbreeze will begin creating the modified IPSW and will be saved on desktop as Sn0wbreeze.xxxxx when done.

Step 5

Put your device in Pwnd DFU mode. by following the instructions given to you by Sn0wbreeze.

If you have a broken Home key, use Redsn0w to enter Pwn DFU mode. follow this tip

launch Redsn0w (latest verion)
Click Extras, and then click Even more, finally click on DFU IPSW
Click OK and then select the first ORIGINAL IPSW you downloaded, NOT the Sn0wbreeze version.
Once you have done, Redsn0w will create a new IPSW named as ENTER_DFU_iPhone3,1_6.1_10B144_Restore

Now connect your phone to your computer and let iTunes detect it. Click on phone and you will be taken to the summary page. Hold down the Shift button on your computer and click on Restore.

Select 'ENTER_DFU_iPhone3,1_6.1_10B144_Restore' that Redsn0w created for you.

iTunes would try to restore to that modified IPSW, it will even show progress bar, show the iTunes logo at a point. Don't panic. After a while, it will enter DFU mode.

You can confirm the DFU mode with Redsn0w

********

NB: To avoid error 1600 when doing the main restore, launch Sn0wbreeze and then click on iReb at the top-left and run it. You would be asked if you want to run for Apple TV 2. Click no and then click 'start' at the bottom. Your device will enter Pwnd DFU mode.

Step 6

iTunes will immediately detect your device in restore mode. Do the Shift + Restore again and then select the IPSW that Sn0wbreeze created for you.

Step7

iTunes will restore to it successfully and you will be in iOS 6.1 with preserved baseband. Phone will reboot and Evasi0n untethered jailbreak will kick in. Don't touch your device while its happening.

When its done, set up your device and Don't enable Location Services. Check your baseband

Step8

If you have a broken home key, use Assistive Touch for your Home key use.

Launch Cydia and let it download the necessary packages and then exit.

********
Most people are not experiencing issue with Ultrasn0w 1.2.8. However, if you have issues with it and prefer the 1.2.7 version, use the steps below

Step 9

Download iTools and Ultrasn0w 1.2.7 from here and extract to your desktop. Connect your device to your computer and launch iTools.

iTools will detect your device. Click on FileSystem and then type in the address at the top /var/root/Media/Cydia/AutoInstall/as seen in the image.

Step 10

Click on Upload>file and then select the two files you downloaded (ultrasn0w 1.2.7 and mobile substrate)

Step 11

Reboot your device twice and then you will see your network bars showing up.

After all done, you should be in iOS 6.1 with the same baseband as before and unlocked with Gevey sim.

Baca Selengkapnya ....

Fix "No Service" Problem After Ultrasn0w Update & Evasi0n Jailbreak

Posted by Unknown Kamis, 07 Februari 2013 0 komentar

Evasi0n untethered jailbreak of iOS 6 is still one of the best things that have happened in the jailbreak scene since iOS 5.1.1 jailbreak.

While many have quickly jumped and grabbed on the oppurtunity to untether jailbreak their devices before Apple patches again, some have encountered many issues with the jailbroken device.

One is the issue of Cydia shrinking in size while some have the Weather app problem although these abnormalities have been fixed with new release of Evasi0n.

Just today, I tried to untether jailbreak an already Semi-jailbroken iPhone 3GS on iOS 6.0.1 new bootrom, baseband 5.13.04 (downgraded from 06.15.00).

Evasi0n 1.1 noticed that it was jail-broken and advised that I install the untethered jailbreak via Cydia.

I fired up Cydia, allow it to download packages, and then install Evasi0n untethered jailbreak files.

I was asked to upgrade some already installed programs. I Installed other packages including upgrading Ultrasn0w 1.2.7 to 1.2.8. Immediately Ultrasn0w 1.2.7 got upgraded, network bars disappeared and "No Service" was displayed. When you power on your device, Evasi0n will do some work on your device before it boots into the main screen. I was patient and allowed it to complete its untethered jailbreak - and still "No Service"

This network bar issue should only happen when I power on the device without booting tethered.

If you ended up like I described above, this fix should get you back.

Step 1

Launch Cydia and go to Manage>Packages>Ultrasn0w. Click on Modify and then Remove

Also Remove Ultrasn0w fixer in like manner if you have it installed

Step 2.

Since you can't get Ultrasn0w 1.2.7 anymore from Cydia, you will need to download it manually and Install. To do that, click here to download Ultrasn0w 1.2.7. extract to a folder on your desktop when download complete.

Step 3

Download iTool or iFunbox or DiskAid. For this tutorial, i am using iTools.

Plug in your device and launch iTools
Click FileSystem at the left side of the screen
at the top of the screen you will see a search bar, type this into it /var/root/Media/Cydia/AutoInstall
A blank page shows up. Click on Upload>file
Now select the Ultrasn0w files you deleted and enter. Both files will show up in the empty space

iTools

Step 4

Switch Off and On your device twice. After that your network bars should be up again.

If not, you can go download Ultrasn0w fixer 6.0.1 if you find it.

I hope you do find this tutorial useful.

Baca Selengkapnya ....

How To Update Your Blackberry OS Simplified

Posted by Unknown Kamis, 20 Desember 2012 0 komentar

How to update your blackberry OS

One common task that smartphone owners would always like to do issue updating of new operating system for their devices.

Blackberry device owners can update their device by following the step by step guide below. Please make sure you back up your device before doing this.

Needed Items

1. Internet Connection

2. A computer

3. Blackberry Desktop Manager software installed on the computer

4. Connection cable

5. New operating system higher than the one installed on your device.

Assuming you have all needed items, proceed as detailed below.

Step 1

Download the blackberry desktop manager onto your computer and install it. Once installed, launch it

Step 2

Plug in your device into the computer and let it install the drivers needed for your desktop manager to identify your phone.

Step 3

Download the new Operating System you want on your phone to the computer and install it.

Step 4

Once you have installed the new OS into your computer, go to this folder: local disk C:/program files/Common files/Research In Motion/App Loader

Once in this folder, delete the file Vendor.xml file completely from your computer and recycle bin.

Step 5

Once it's deleted, plug in your phone into the computer again. Once plugged in, you will be notified of an OS update. Click Update now for the update process to begin.

Please DO NOT DISCONNECT your DEVICE when doing this as it could brick your device if you do.

Step 6

When done, your device will reboot and it would be updated.

Drop your comments below of you found this post helpful

Baca Selengkapnya ....